Products

API 5LGB /ASTM A106B/ASME A53 GB

ASTM A106 / ASME SA106 pipes are seamless carbon steel pipes used for high tempertaure applications (up to 750 degrees F). These pipes are widely used in the oil & gas, petrochemical, power generation and ship-building industries (examples: refineries, downstream plants, vessels. boilers and towers). A106 pipes are particularly suited whenever the transported fluid has either high temperature or high pressure (or both combined).

Availability: 307 in stock

Length

6/12

Description

API 5L GB /ASTM A106B/ASME A53 GB

ASTM A106 Carbon Steel Pipe For High Temperature
ASTM A106 / ASME SA 106 pipes are seamless carbon steel pipes used for high temperature applications (up to 750 degrees F). These pipes are widely used in the oil & gas, petrochemical, power generation and ship-building industries (examples: refineries, downstream plants, vessels. boilers and towers). A106 pipes are particularly suited whenever the transported fluid has either high temperature or high pressure (or both combined).

ASTM A106 / SA106 pipes are available in size range from 1/2 to 28 inches, and in pipe schedules from 10 to 160. These pipes are supplied either in single random lenght (17-24′) or double random lenght (36 -44′).

In terms of material grades, A106 pipes are manufactured in grade A, B and C. NPS 1-1/2? and below are available in the hot finished or by cold drawn type. Pipes of NPS 2 inch and above are generally are hot rolled manufatured. A106 pipes are produced out of killed steel. The chemical composition and Machanical Property of the three grades of ASTM A106 is shown in the following table:

ASTM A106 Carbon Steel Pipe For High Temperature
ASTM A106 Carbon Steel Pipe For High Temperature

Chemical composition:

Chemical composition %
ElementCMnPSSiCrCuMoNiV
maxmaxmaxminmaxmaxmaxmaxmax
A106 Grade A0.250.27-0.930.0350.0350.100.400.400.150.400.08
A106 Grade B0.300.29-1.060.0350.0350.100.400.400.150.400.08
A106 Grade C0.350.29-1.060.0350.0350.100.400.400.150.400.08

Machanical Property:

ASTM A106 pipeGrade AGrade BGrade C
Tensile Strength, min., psi48,00060,00070,000
Yield Strength, min., psi30,00035,00040,000

Hydrostatic Test of A106 pipes:
The hydrotest shall apply a pressure equal to 60% of the minimum yield strength for at least 5 seconds at atmospheric conditions. The maximum pressure shall not exceed 2500 psi for pipes up to 3 inches, and 2800 for larger sizes. If additional, non standard, tests are executed the pipe shall bear an “S” mark on each lenght or pipe bundle.

 

Leave us a message

Message

Related Products

Shopping Cart