Products

Seamless Carbon Steel Pipe

Description

Seamless Carbon Steel Pipe

Seamless carbon steel pipe is a type of pipe made from carbon steel without any welded joints or seams. It is manufactured by heating a solid billet of carbon steel and then stretching it to form a hollow tube. This manufacturing process results in a pipe with uniform dimensions and excellent strength properties. Seamless carbon steel pipes are commonly used in various industries for conveying fluids and gases at high temperatures and pressures, such as in oil and gas exploration, refineries, power plants, and chemical plants.

Seamless Carbon Steel Pipe

Due to their different manufacturing processes, seamless steel pipes are divided into two types: hot-rolled (extruded) seamless steel pipes and cold-drawn (rolled) seamless steel pipes. Cold drawn (rolled) tubes are divided into two types: round tubes and special-shaped tubes. Seamless steel pipes are divided into the following varieties because of their different uses:
1. Seamless carbon steel pipes for structural use (GBT8162-2008). Mainly used for general structure and mechanical structure. Its representative materials (grades): carbon steel, No. 20 and No. 45 steel; alloy steel Q345, 20Cr, 40Cr, 20CrMo, 30-35CrMo, 42CrMo, etc.
2. Seamless carbon steel pipes for conveying fluids (GBT8163-2008). It is mainly used for conveying fluid pipelines on engineering and large equipment. Representative materials (grades) are 20, Q345, etc.
3. Seamless carbon steel pipes for low and medium pressure boilers (GB3087-2008) are used to manufacture superheated steam pipes, boiling water pipes for low and medium pressure boilers of various structures, superheated steam pipes, large smoke pipes, small smoke pipes and arch bricks for locomotive boilers High-quality carbon structural steel hot-rolled and cold-drawn (rolled) seamless steel pipes for pipes. Representative materials are No. 10 and No. 20 steel.
4. Seamless steel tubes for high-pressure boilers (GB5310-2008) are high-quality carbon steel, alloy steel and stainless heat-resistant seamless steel tubes for the heating surface of water tube boilers for high pressure and above. Representative materials are 20G, 12Cr1MoVG, 15CrMoG, etc.
5. High-pressure chemical fertilizer equipment seamless steel pipe (GB6479-2000) is a high-quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipelines with a working temperature of -40~400°C and a working pressure of 10~30Ma. Representative materials are 20, 16Mn, 12CrMo, 12Cr2Mo, etc.
6.Seamless carbon steel pipes for petroleum cracking (GB9948-2006). Mainly used in boilers, heat exchangers and pipelines for conveying fluids in petroleum smelters. Its representative materials are 20, 12CrMo, 1Cr5Mo, 1Cr19Ni11Nb and so on.
7. Seamless carbon steel pipes for geological drilling (YB235-70) are steel pipes used for core drilling by geological departments, and can be divided into drill pipes, drill collars, core pipes, casing pipes and sedimentation pipes according to their uses.
8. Seamless carbon steel pipes for diamond core drilling (GB3423-82) are seamless steel pipes used for drill pipes, core rods and casings for diamond core drilling.
9. Oil drilling pipe (YB528-65) is a seamless steel pipe that is thickened inside or outside at both ends of oil drilling. There are two types of steel pipes: threaded and non-threaded. The threaded pipes are connected with joints, and the non-threaded pipes are connected with tool joints by butt welding.
10. Carbon steel and carbon-manganese steel seamless steel pipes for ships (GB/5312-1999) are carbon steel seamless steel pipes used in the manufacture of Class I pressure-resistant piping systems, Class II pressure-resistant piping systems, boilers and superheaters. The working temperature of the carbon steel seamless steel pipe wall does not exceed 450°C, and the working temperature of the alloy steel seamless steel pipe wall exceeds 450°C. Representative materials are 360, 410, 460 steel grades, etc.
11. The seamless steel pipe for automobile half shaft casing (GB3088-82) is a hot-rolled seamless steel pipe of high-quality carbon structural steel and alloy structural steel for the manufacture of automobile half shaft casing and drive axle housing shaft pipe.
12. High-pressure oil pipes for diesel engines (GB3093-86) are cold-drawn seamless steel pipes for manufacturing high-pressure pipes for diesel engine injection systems.
13. Precision inner diameter seamless steel tubes for hydraulic and pneumatic cylinders (GB8713-88) are cold-drawn or cold-rolled precision seamless steel tubes with precise inner diameters for the manufacture of hydraulic and pneumatic cylinders.
14. Cold-drawn or cold-rolled precision seamless steel pipe (GB3639-83) is a cold-drawn or cold-rolled precision seamless steel pipe with high dimensional accuracy and good surface finish for mechanical structures and hydraulic equipment. The use of precision seamless steel pipes to manufacture mechanical structures or hydraulic equipment can greatly save machining hours, improve material utilization, and help improve product quality.
15. Stainless steel seamless steel pipe for structural use (GB/T14975-2002) is a hot-rolled stainless steel pipe widely used in chemical, petroleum, textile, medical, food, machinery and other industries for corrosion-resistant pipes and structural parts and parts. (extruded, expanded) and cold drawn (rolled) seamless steel tubes.

In addition, there are GB/T17396-1998 (hot-rolled seamless steel pipes for hydraulic props), GB3093-1986 (high-pressure seamless steel pipes for diesel engines), GB/T3639-1983 (cold-drawn or cold-rolled precision seamless steel pipes), GB /T3094-1986 (cold-drawn seamless steel pipe with special-shaped steel pipe), GB/T8713-1988 (precision inner diameter seamless steel pipe for hydraulic and pneumatic cylinders), GB13296-1991 (stainless steel seamless steel pipe for boilers and heat exchangers), GB/T14975 -2002 (stainless steel seamless steel pipes for structural use), GB/T14976-2002 (stainless steel seamless steel pipes for fluid transportation), GB/T5035-1993 (seamless steel pipes for automobile axle shaft casings), API SPEC5CT-1999 (casing and oil pipes specification), etc.

Leave us a message

Message

Related Products

Shopping Cart